多飞行器再入段时间协同弹道规划方法

提出了一种多飞行器再入段时间协同弹道规划方法。首先,在纵向平面内规划满足航程与终端约束的纵向标称轨迹。随后,在采用轨迹跟踪律跟踪纵向标称轨迹的同时,运用考虑初始横侧向状态的多边界航向偏差角走廊策略控制飞行器的横侧向机动,以满足到达时间约束与终端约束,进而实现单枚飞行器到达时间约束下的轨迹规划。在此基础上,完成了飞行器的到达时间分布与飞行能力分析,给出了最小与最大到达时间的分析计算方法,并根据多飞行器协同再入的任务需求完成了协同飞行时间决策。最后,多飞行器协同再入与扰动条件下的仿真结果表明,该方法能够规划出满足到达时间与终端约束的协同再入轨迹,具备良好的计算精度与鲁棒性。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

临近空间高超声速滑跃式轨迹目标跟踪技术

针对临近空间目标飞行速度快、机动特性强和加速度突变的特性,提出一种地心直角(ECEF)坐标系下基于目标特性分析的修正强跟踪滤波(MSTF)算法。首先,通过对ECEF坐标系下目标量测的无偏转化处理,以有效减小目标高超声速飞行所带来的旋转、平移和线性化误差影响;接着,在对目标特性充分分析的基础上,合理构建强跟踪滤波(STF)模型,通过对模型参数的自适应调节,以有效实现临近空间高超声速滑跃式轨迹目标的精确跟踪;最后,结合统计学原理对目标加速度的突变进行合理检测和补偿,以进一步修正强跟踪滤波模型的跟踪精度。仿真结果表明,与现有的临近空间目标跟踪算法相比,该算法具有较高的定位跟踪精度。     

动态时频谱分析、探测和跟踪的随机有限集法

动态出现和消失多分量信号的时频分析问题一直是非平稳信号处理的难点之一。为此，提出了一种分析、探测和跟踪多分量信号的随机有限集法。该算法利用时频变换，如短时傅里叶变换或自适应谱估计法，以及多项式预测模型，将多分量信号的时频分析问题归纳成可利用随机有限集进行多目标追踪的问题。分析表明：借助于提出的初始权重赋值算法，以及谱分量幅度和频率的联合似然函数，就可利用高斯混合概率假设密度滤波器来实现对动态时频谱的分析、探测和跟踪。在仿真实验中，所提算法有效提升了动态时频谱的跟踪精度，其对微弱时频谱分量的探测能力，以及对载频差异的分析能力均优于文献报道的算法。     

行星着陆大气进入段自适应滑模抗扰控制方法

针对行星探测器着陆过程可能存在的干扰影响着陆精度问题，提出了一种抗干扰控制方法。首先建立行星探测器着陆控制模型，利用非线性干扰观测器实现对系统外部干扰的估计；在此基础上提出一种自适应滑模控制律，使得系统状态快速收敛到平衡点附近。最后，将该方法应用于火星着陆场景进行仿真。结果表明，提出的自适应滑模控制方法能够在未知扰动存在的情况下，有效实现行星探测器安全着陆，提高着陆任务的成功率。     

基于模拟退火粒子群算法的波浪发电系统最大功率跟踪控制

波浪发电系统最大功率点跟踪控制中,传统粒子群算法存在早熟收敛和局部搜索能力不足问题,为此提出基于模拟退火算法的粒子群优化方案。该算法每次更新粒子的速度和位置时,通过比较当前温度下各个粒子的适配值与随机数的大小,从所有粒子中确定全局最优解的替代值,从而使粒子群算法在发生早熟收敛时能够跳出局部最优并快速找到全局最优解。仿真结果表明,与传统粒子群优化算法相比,模拟退火粒子群算法可有效避免波浪发电系统陷入局部最大功率点,并快速实现全局最大功率跟踪,提高了波浪能捕获率。     

多飞行器动态目标追踪协同控制研究

多飞行器追踪动态目标是一个协同控制问题,需要根据目标飞行状态,协同各个追踪飞行器的飞行状态,最终能够在某动态的最佳点实现同时到达。考虑到目标具有较强的机动性,轨迹通常为非线性的,设计了一种基于非线性轨迹预测的、以剩余时间为控制变量的一致性控制方案。仿真结果表明,提出的控制方案能够实现空间位置相距较远的多飞行器动态追踪,具有较好的灵活性和收敛性,目标轨迹的预测结果与实际轨迹误差较小,恰当的轨迹估计有助于缩短追踪时间,提高追踪效率。     

基于变量集结预测控制的四旋翼无人机控制器设计

针对四旋翼无人机路径跟踪问题，设计了一种基于变量集结预测控制的控制器。首先以四旋翼无人机状态空间模型为基础建立预测模型；接着设计控制器时采用分段集结的策略把控制量集结成三段优化序列以减少优化计算量，并降低优化保守性，为了进一步加强系统稳定性，控制器引入终端代价函数和终端约束；最后用四旋翼无人机的动力学模型作为被控对象进行仿真验证，结果表明：该控制器能使四旋翼无人机在三轴方向均能实现一个良好的路径跟踪效果。与传统方法相比，这种基于变量集结的预测控制策略能够减小在线优化量，更适合四旋翼无人机飞控芯片的应用。     

Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

基于双力源的叠加式多维力传感器校准装置研究CSCD

介绍了一种基于叠加机原理的双力源多维力传感器校准装置的设计与研制,对装置的测量不确定度进行了分析,通过对三分量力传感器的校准实验,证明了校准装置不仅可以对多分量力传感器进行单分量校准,还能方便地实现耦合误差的校准。